1958 Plymouth Fury description and specs

1958 Plymouth Fury

Design and Features

The 1958 Plymouth Fury was a standout model in the late 1950s, characterized by its bold fins and flashy design. It was available exclusively in Buckskin Beige with gold-anodized aluminum trim, which contributed to its luxurious appearance. The interior options included beige or gold upholstery, enhancing its status as a top-tier model for Plymouth during that era.

Performance

Under the hood, the 1958 Fury offered impressive engine options. The standard engine was a 318 cubic inch (5.2 L) V8, producing 290 horsepower. An optional 350 cubic inch (5.7 L) “Golden Commando” engine with dual four-barrel carburetors was available, generating 305 horsepower. There was also a fuel-injected version that produced 315 horsepower, although it faced reliability issues and was later replaced with a conventional setup.

Cultural Impact

The 1958 Plymouth Fury gained iconic status through its role in Stephen King’s novel “Christine,” where it is depicted as a possessed car that wreaks havoc on its owner. This connection to pop culture has solidified its place in automotive history, making it a sought-after classic among collectors and enthusiasts.

Market and Collectibility


While not the top seller of its time, the 1958 Fury’s limited production—only 7,438 units were made—adds to its allure today. Its unique design and historical significance make it a valuable collector’s item, often fetching high prices at auctions and classic car sales.

In summary, the 1958 Plymouth Fury is not just a car; it represents a significant era in American automotive design and culture, making it a cherished classic among enthusiasts.

1958 Plymouth Fury Specs

BODY
Body Maker: Plymouth
No. Of Doors: 2
DIMENSIONS
Length: 206 inches
Width: 79.3 inches
Height: 54.6 inches
Wheelbase: 118 inches
Weight: 3,510 lbs
ENGINE
Type: Own, V8, OHV, Downdraft 4-barrel, Helical
Displacement: 317.58 cu. in.
Cylinders: 8
Bore And Stroke: 3 29/32 & 3 5/16 inches
Compression Ratio Standard: 9.25 to 1
Compression Ratio Optional: Not applicable
Horsepower Brake: 290@5200
Horsepower Rated: 48.83
Torque: 330@3600
Main Bearings: 5
Valve Lifters: Hydraulic
Block Material: Cast Iron
Engine Number Location: On front of block beneath left cylinder head, or on right side of block beneath distributor, or on top of block behind water pump.
Lubrication: Pressure to all bearings excluding wrist pin
Carburetor Make: Carter
TRANSMISSION
Type: 2.75 Pints
Drive: Rear wheel drive
Clutch Type: Single plate dry disc
Clutch Size: 10.5 inches
Gear Ratios (Total): 3
Gear Ratios First: 2.31 to 1
Gear Ratios Second: 1.55
Gear Ratios Third: 1 to 1
Gear Ratios Fourth: Not applicable
Gear Ratios Fifth: Not applicable
Gear Ratios Reverse: 2.96
AXLE
Type: Semifloating
Differential Type: Hypoid
Differential Ratio: 3.54 to 1
SUSPENSION
Front: Independent torsion bar
Rear: Longitudinal leaf spring
BRAKES
Service Type: 4 wheel hydraulic drum
Service Front Size: 11 inches
Service Rear Size: 11 inches
Emergency Type: On the drive shaft
WHEEL & TIRES
Tire Size: 7.5 x 14
Spare Location: Trunk
CAPACITIES
Fuel: 20 Gallons
Oil: 5 Quarts
Rear Differential: 3.5 Pints
Front Differential: Not applicable
Transfer Case: Not applicable
VIN/ID
Serial Number: LP2Ha1001 and up
Total Digits: N/A
OPTIONAL EQUIPMENT
Sport Coupe: Opt
Torque Flite Automatic Transmission: Opt
Power Brakes: Opt
Power Steering: Opt
EXTERIOR COLORS
Iceberg White, Bluebonnet Blue, Misty Green, Midnight Blue, Royal Red, Sunflower Yellow, Stardust Blue Metallic, Ivy Green Metallic, Metallic Suede, Buckskin Beige, Toreador Red, Arctic Turquoise Metallic, Metallic Coral, Copper Glow Metallic, Canyon Gold Metallic, Sunset Beige